På Mondeo mk4 kan man, på modeller med kørecomputer eller Converse+ se diverse informationer via displayet i instrumentbordet. 

For at komme til menuen holdes OK knappen på rattet inde mens der drejes til tænding. Herefter kan du bladre igennem menuerne med pilene op og ned på rattet.

 

 

 

Instrument Cluster Self-Diagnostic Mode

1. To enter the instrument cluster Self-Diagnostic Mode: Simultaneously press and hold the OK button and turn the ignition switch from position 0, to position II. Keep the OK button pressed until you see 'TEST' in the instrument cluster.

2. Entry to the Self-Diagnostic Mode is confirmed when 'TEST' is displayed in the information and message center display. The set button must be released within three seconds of 'TEST' being displayed or the instrument cluster will exit the Self-Diagnostic Mode.

3. To navigate through or skip any of the instrument cluster Self-Diagnostic Mode tests, press the OK button. If the OK button is pressed for more than 3 seconds between tests, the instrument cluster will exit the Self-Diagnostic Mode.

4. The Self-Diagnostic Mode is deactivated when the ignition switch is turned to the OFF position or low battery voltage is detected.

5. If input data to the instrument cluster is missing or invalid, the information and message center will display '----'